- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
C45 (1.0503) is a kind of medium carbon high strength steel with high strength. Because of poor hardenability, it is used in normalizing condition. Cold deformation, medium plasticity, annealing and normalizing of machinability....
301 stainless steel specifications for heat treatment: solid solution, 1010~1150 DEG C, quick cooling. From the metallography point of view, because the stainless steel contains chromium, the surface forms a very thin chromium film, which separates from t...
The 4Cr13 characteristic is higher than 3Cr13 hardness and good corrosion resistance after quenching. 4Cr13 steel plate is delivered in annealed condition....
ST52 steel is also the maximum load capacity of plastic or metal under static tensile condition. For plastic material, which characterize the maximum resistance uniform plastic deformation, tensile specimens before under maximum tensile stress, the deform...
EN10025-3 S355NL steel plate is the normalized steel EN10025-3,as his standard (fine grained steel). EN10025-3 S355NL steel plate yield strength and tensile strength equal to Q345 low alloy steel in our country, corresponding NL is the requirement of 5...
JISG3106 SM400A carbon steel plate is classify by chemical composition, JISG3106 SM400A carbon steel plate is divided into low carbon, medium carbon and high carbon steels....
E36 steel has good low-temperature impact toughness, the technical difficulties and therefore the development of E36 ship plate is not only the strength requirements, at the same time on the low temperature (-40 DEG) impact toughness and welding performan...
C55K steel plate is one mainly of high carbon steel and under UNE36011 standard. UNE36011 C55K is widely used for gear, connecting rod, wheels, wheel rim, flat spring, also for casting. The main Chemical composition of UNE36011 C55K steel includes C ,si a...
