- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
FOB Reference Price：Get Latest Price
Offer Ability:5 000MT/Per Month ASME SA514 Gr.E/SA514 Grade E alloy steel plates
ASME SA514 Gr.E/SA514 Grade E alloy steel plates are high yield strength steel of structural quality intended primarily for use in welded bridges and other structures. ASME SA514 Gr.E/SA514 Grade E alloy steel plates are mainly for welding bridge and other structures with thickness less than or equal to 150mm.
ASME SA514 Gr.E/SA514 Grade E alloy steel plates chemical composition:
| Grade | C | Mn | P | S | SI | Ni | Cr | Mo | V | Ti | Zr | Cu | B |
| SA514 Gr.E | 0.12-0.20 | 0.40-0.70 | ≤0.035 | ≤0.04 | 0.20-0.35 | ~ | 1.40-2.00 | 0.40-0.60 | ~ | 0.04-0.10 | ~ | 0.20-0.40 | 0.0015-0.005 |
ASME SA514 Gr.E/SA514 Grade E alloy steel plates mechanical property:
| Grade | Thickness Inch | Yield Strength | Tensile Strength | Elongation in 50mm | Hardnees Brinell |
| SA514 Gr.E | less 3/4 inch | 690 Mpa | 760-895 Mpa | 18% | 235 |
| over 3/4 to 2 1/2 | 690 Mpa | 760-895 Mpa | 18% | ~ | |
| over 2 1/2 to 6 inch | 620 Mpa | 690-895 | 16% | ~ |
ASME SA514 Gr.E/SA514 Grade E alloy steel plates shall be quenched and tempered by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree for quenching in water or oil, and tempering temperature at not less 620 degree.
BBN Steel is specializing in ASME SA514 Gr.E/SA514 Grade E alloy steel plates which is under ASME specification.ASME SA514 Gr.E/SA514 Grade E alloy steel plates has excellent mechanical properties and widely application. Combining above advantages can be supplied the most in line with customer requirements products. Moreover,we will provide cutting, pretreatment, galvanizing, testing, heat treatment services for ASME SA514 Gr.E/SA514 Grade E alloy steel plates.If you want to known ASME SA514 Gr.E/SA514 Grade E alloy steel plates more information,welcome to contact with us at any time: [email protected].
1.Additional Condition: UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
2.Shipping department: a).Book shipping space b).Documents confirmation c).Shipping track d).Shipping case
3.Production control department: a).Technical evaluation b).Production Schedule c).Production Tracking d).Successfully complaint case
4.Quality control: a).Test in mill b).Inspection before Shipment c).Third Party Inspection d).About Package problem e).Quality problem case
5.Customers’ feedback and complaint: a).Quality feedback b).Service feedback c).Complaint d).Case
