- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
ASTM A283C carbon steel plate mainly used in the manufacture of anchor bolt,shares,funnel,roof board, rivet, low carbon steel wire, sheet, welding tube, rod, hook, support, welding structure.
A283 Grade C Chemical Composition.
...
ASTM A36 common structural steel plate is readily welded by all welding processes. As a result, the most common welding methods for A36 are the cheapest and easiest: shielded metal arc welding (SMAW, or stick welding), gas metal arc welding (GMAW, or MIG...
S420MC hot rolled steel plate is made of high quality hot rolled sheet as raw material, after pickling to remove an oxide layer, trimming, finishing, surface quality requirements and the use of (mainly cold molding or stamping properties) of intermediate...
EN 10111 DD11 low carbon steel is a hot-rolled low carbon steel made by Germany. EN 10111 DD11low carbon steel is a kind of low carbon steel produced by hot rolling process. EN 10111 DD11low carbon steel does not represent material of specific composition...
C45 (1.0503) is a kind of medium carbon high strength steel with high strength. Because of poor hardenability, it is used in normalizing condition. Cold deformation, medium plasticity, annealing and normalizing of machinability....
301 stainless steel specifications for heat treatment: solid solution, 1010~1150 DEG C, quick cooling. From the metallography point of view, because the stainless steel contains chromium, the surface forms a very thin chromium film, which separates from t...
The 4Cr13 characteristic is higher than 3Cr13 hardness and good corrosion resistance after quenching. 4Cr13 steel plate is delivered in annealed condition....
ST52 steel is also the maximum load capacity of plastic or metal under static tensile condition. For plastic material, which characterize the maximum resistance uniform plastic deformation, tensile specimens before under maximum tensile stress, the deform...
