- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
FOB Reference Price：Get Latest Price
Offer Ability:5 000MT/Per Month ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates
ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates are suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.
ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates chemical composition:
|
Grade |
C |
Si |
Mn |
P |
S |
N |
Ni |
Cr |
Mo |
|
SA633 Gr.E |
≤0.22 |
0.15-0.50 |
1.15-1.50 |
≤0.035 |
≤0.04 |
≤0.03 |
- |
- |
- |
ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates mechanical property:
| Grade |
Yield Strength |
Tensile Strength |
Elongation in 2 in. |
|
SA633 Gr.E |
≧380 Mpa |
515-690 Mpa |
≧23% |
ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates provide a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive. For the thickness above 75mm, SA633 Grade E steel plates need to be done double normalized. For SA633 Grade E steel plates wider than 610mm, the elongation requirement is reduced two percentage points when rolling.
BBN Steel is specializing in ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates which is under ASME specification.ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates has excellent mechanical properties and widely application. Combining above advantages can be supplied the most in line with customer requirements products. Moreover,we will provide cutting, pretreatment, galvanizing, testing, heat treatment services for ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates.If you want to known ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates more information,welcome to contact with us at any time: [email protected].
1.Additional Condition: UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
2.Shipping department: a).Book shipping space b).Documents confirmation c).Shipping track d).Shipping case
3.Production control department: a).Technical evaluation b).Production Schedule c).Production Tracking d).Successfully complaint case
4.Quality control: a).Test in mill b).Inspection before Shipment c).Third Party Inspection d).About Package problem e).Quality problem case
5.Customers’ feedback and complaint: a).Quality feedback b).Service feedback c).Complaint d).Case
