- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
Corten A steel, also known as weathering steel, is designed to minimize maintenance by forming a protective rust layer that prevents further corrosion. However, whether it needs maintenance depends on the environment and application. While it requires les...
The life expectancy of Corten steel depends on several factors, including the environment, maintenance, and thickness of the steel. Corten steel, also known as weathering steel, is designed to form a stable, protective rust layer on its surface when expos...
The main differences between S355J2 and S355NL are related to their toughness, temperature performance, and their intended use in specific environmental conditions. Both are grades of structural steel under the EN 10025-2 standard, but they differ in thei...
S355NL is a grade of structural steel defined under the European standard EN 10025-3 for hot-rolled products of structural steels. It is a thermomechanically rolled steel that is designed for use in low-temperature environments and has higher toughness an...
S235JR and A36 are both structural steel grades commonly used in construction and engineering, but they originate from different standards and have some differences in chemical composition and mechanical properties. However, they are often considered equi...
The raw material of S235JR steel plate is non-alloy carbon steel. It is primarily composed of iron (Fe) as the base metal, with controlled amounts of carbon (C), manganese (Mn), phosphorus (P), and sulfur (S) to achieve the desired mechanical properties a...
The primary difference between SUS304 and SUS430 lies in their chemical composition, mechanical properties, corrosion resistance, and typical applications, as they belong to different stainless steel families....
JIS G4304 SUS304 stainless steel is a widely used austenitic stainless steel grade under the Japanese standard JIS G4304, commonly used for hot-rolled stainless steel plates, sheets, and strips. Its equivalent grades in other international standards are a...
