- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
FOB Reference Price：Get Latest Price
Offer Ability:5 000MT/Per Month GB/T 4237 0Cr18Ni10Ti Stainless acid resistant steel
0Cr18Ni10Ti Adds Ti element to 304 steel to prevent inter granular corrosion, Suitable for use at temperatures from 430 ° C to 900 ° C.
1Cr18Ni9Ti has been gradually replaced by 0Cr18Ni10Ti, 1Cr18Ni9Ti has a high carbon content, 0Cr18Ni10Ti has better resistance to inter granular corrosion than 1Cr18Ni9Ti.
Characteristics of 0Cr18Ni10Ti:
0Cr18Ni10Ti is a steel that is resistant to air, steam, water and other weakly corrosive media and chemically etched media such as acid, alkali and salt.
Chemical composition (mass fraction) (wt %) of the 0Cr18Ni10Ti:
|
Grade |
Standard |
Country |
Application |
|
0Cr18Ni10Ti |
GB |
China |
Seamless stainless steel tubes for boiler and heat exchanger |
Mechanical properties of grade 0Cr18Ni10Ti:
|
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition |
Brinell hardness (HBW) |
|
354 (≥) |
234 (≥) |
34 |
23 |
33 |
Solution and Aging, Annealing, Ausaging, Q+T,etc |
432 |
0Cr18Ni10Ti scope of application:
0Cr18Ni10Ti Stainless steel plate is used in aircraft, exhaust pipes, boiler drums, etc.
BBN Steel is specializing in GB/T 4237 0Cr18Ni10Ti Stainless acid resistant steel which is under GB/T specification.GB/T 4237 0Cr18Ni10Ti Stainless acid resistant steel has excellent mechanical properties and widely application. Combining above advantages can be supplied the most in line with customer requirements products. Moreover,we will provide cutting, pretreatment, galvanizing, testing, heat treatment services for GB/T 4237 0Cr18Ni10Ti Stainless acid resistant steel.If you want to known GB/T 4237 0Cr18Ni10Ti Stainless acid resistant steel more information,welcome to contact with us at any time: [email protected].
1.Additional Condition: UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
2.Shipping department: a).Book shipping space b).Documents confirmation c).Shipping track d).Shipping case
3.Production control department: a).Technical evaluation b).Production Schedule c).Production Tracking d).Successfully complaint case
4.Quality control: a).Test in mill b).Inspection before Shipment c).Third Party Inspection d).About Package problem e).Quality problem case
5.Customers’ feedback and complaint: a).Quality feedback b).Service feedback c).Complaint d).Case
