S690QL steel is high yield strength structural steel, and it is produced in compliance with EN 10025-6 standard. EN 10025-6 S690QL steel is usually heat treated using quench and temper techniques. What is EN 10025-6 S690QL equivalent ASTM steel? A709 grade 100 material is usually considered the EN 10025-6 S690QL equivalent ASTM steel. Besides, S690QL equivalent ISO steel is E690.
EN 10025-6 S690QL steel chemical composition:
EN 10025-6 | C | Si | Mn | P | S | N | B | Cr |
S690QL | 0.20 | 0.80 | 1.70 | 0.025 | 0.015 | 0.015 | 0.005 | 1.50 |
Cu | Mo | Nb | Ni | Ti | V | Zr | ||
0.50 | 0.70 | 0.06 | 2.0 | 0.05 | 0.12 | 0.15 |
EN 10025-6 S690QL equivalent ASTM steel A709 grade 100 chemical composition:
ASTM A709 | C max | Si max | Mn | P max | S max | Cu min | V max | Nb | Ni max | Cr max | Mo max | Al min | N |
A709 grade 100 | 0.26 | 0.4 | 0.4-0.9 | 0.04 | 0.05 |
EN 10025-6 S690QL steel mechanical property:
Designation | Mechanical Properties (ambient temperature) | |||||||
Grade | Steel Number |
Min. Yield Strength Reh MPa | Tensile Strength Rm MPa | Min. % elongation after fracture |
||||
Nominal thickness (mm) | Nominal thickness (mm) | |||||||
≥3 ≤50 | ≥50 ≤100 | ≥100 ≤150 | ≥3 ≤50 | ≥50 ≤100 | ≥100 ≤150 | |||
S690QL | 1.8928 | 690 | 650 | 630 | 770/940 | 760/930 | 710/900 | 14 |
EN 10025-6 S690QL equivalent ASTM steel A709 grade 100 mechanical property:
ASTM A709 | Yield Strength (MPa) min. |
Tensile Strength (MPa) min. |
Elongation in 8 in. min. % |
Elongation in 2 in. min. % |
A709 grade 100 | 690 | 760-895 | - | 18 |
From above tables about chemical composition and mechanical property of EN 10025-6 S690QL steel and EN 10025-6 S690QL equivalent ASTM steel A709 grade 100, we can see the strength of S690QL steel and EN 10025-6 S690QL equivalent ASTM steel A709 grade 100 are close but not totally same. So even they are equivalent, they can not replace each other arbitrarily.