SA517 Gr F steel plate data sheet

1. SA517 Gr F steel plate has high strength, high toughness and good welding performance. SA517 Gr F steel plate implements ASME SA517/SA517M standards and belongs to killed steel.

2. Chemical composition of SA517 Gr F steel plate:

Grade	C	Mn	P	S	Si	Ni
SA517 Gr F	0.10-0.20	0.60-1.00	≤0.035	≤0.035	0.15-0.35	0.7-1.00
Grade	Cr	Mo	B	V	Ti	Cu
SA517 Gr F	0.40-0.65	0.40-0.60	0.0005-0.006	0.03-0.08	/	0.15-0.50

3. The tensile yield strength of SA517 Gr F steel plate:

Thickness mm	ReL, MPa	Rm, MPa	A50,%
≤65	≥690	795-930	≥16
≥65	≥620	725-930	≥14

4. Delivery status of SA517 Gr F steel plate:
SA517 Gr F steel plate is usually delivered in quenched + tempered/QT state. If the customer has other requirements, it can be delivered with or without heat treatment according to the standard.

5. The welding performance of SA517 Gr F steel plate:
1). Avoid welding cold cracks.
2). The brazing temperature must reach 940 degrees, and it needs to be kept warm for 15 minutes.
3). Heat treatment after welding.
4). Choose the right base material for welding.