ASTM A709Gr36 steel is a kind of low alloy high strength structural steel for bridges building.A709Gr36 steel plates owne minimum yield strength at 250Mpa and tensile strength between 400 and 550 Mpa. For the delivery condition of steel plate A709 Grade 36,As rolled,Control rolled,TMCP with or without accelerated cooling,or quenching and tempering is all ok.ASTM A709Gr36 steel plates supplier, We stock different thicknesses A709Gr36 low alloy steel plates in our port warehouses which ready for shipping out,welcome customers ask for stock list.
ASTM A709Gr36 steel product is availabel in structural shapes, plates and bars, and quenched and tempered alloy steel for structural plates intended for use in bridges. Heat analysis shall be used to determine the percentage of carbon, manganese, phosphorus, sulfur, silicon, and copper for the required chemical composition.
ASTM A709 Grade 36 Steel Plates Specification
Standard: ASTM A709
Grade: A709Gr36
Thickness: 8mm-300mm,
Width: 1500-4020mm,
Length: 3000-27000mm
Form: coils, foils, rolls, plain sheet, shim sheet,flats,bars,
Finish: Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Application: Bridge Steel
ASTM A709Gr36 structural steel products furnished under this specification shall conform to the requirements of the current edition of Specification A6/A6M, for the specific structural product ordered, unless a conflict exists in which case this specification shall prevail.
