ASTM A36 plate thickness tolerance

ASTM A36 plate thickness tolerance

ASTM A36 plate thickness tolerance should be in accordance with the regulations of ASTM A6/A6M standard.

ASTM A36 plate thickness tolerance for widths given in inches, in.

Specified Thickness, in. 48 and under Over 48 to 60, excl 60 to 72, excl 72 to 84, excl 84 to 96, excl 96 to 108, excl 108 to 120, excl 120 to 132, excl 132 to 144, excl 144 to 168, excl 168 to 182, excl 182 and over
To 1⁄4 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.04 ... ... ...
1⁄4 to 5⁄16 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.04 0.04 ... ... ...
5⁄16 to 3⁄8 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.05 ... ...
3⁄8 to 7⁄16 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.05 0.06 0.06 ...
7⁄16 to 1⁄2 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.05 0.06 0.06 ...
1⁄2 to 5⁄8 , excl 0.03 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.05 0.06 0.07 ...
5⁄8 to 3⁄4 , excl 0.03 0.03 0.03 0.03 0.03 0.04 0.04 0.04 0.05 0.06 0.07 0.07
3⁄4 to 1, excl 0.03 0.03 0.03 0.03 0.04 0.04 0.05 0.05 0.06 0.07 0.08 0.09
1 to 2, excl 0.06 0.06 0.06 0.06 0.06 0.07 0.08 0.1 0.1 0.11 0.13 0.16
2 to 3, excl 0.09 0.09 0.09 0.10 0.1 0.11 0.12 0.13 0.14 0.15 0.15 ...
3 to 4, excl 0.11 0.11 0.11 0.11 0.11 0.13 0.14 0.14 0.14 0.15 0.17 ...
4 to 6, excl 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 ...
6 to 10, excl 0.23 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.27 0.28 ...
10 to 12, excl 0.29 0.29 0.33 0.33 0.33 0.33 0.33 0.33 0.33 0.33 0.35 ...
12 to 15, incl 0.29 0.29 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 ...

Notes:
1. Permitted variation under specified A36 plate thickness, 0.01 in.
2. A36 plate thickness to be measured at 3⁄8 to 3⁄4 in. from the longitudinal edge.
3. For A36 plate thicknesses measured at any location other than that specified in Note 2, the permitted variations over specified thickness shall be 13⁄4 times the amounts in this table, rounded to the nearest 0.01 in.
4. Where “...” appears in this table, there is no requirement.

If you need to buy ASTM A36 plates, please remember ASTM A36 plate thickness tolerance. Generally, the reputable ASTM A36 plates supplier will produce A36 plates in strict accordance with ASTM A36/ A36 standard, and the ASTM A36 plate thickness tolerance can meet regulations of ASTM A6/A6M standard.