- 0086-371-86151827
- [email protected]
Call Us:
Contact With Us:
BBN steel is engaged in EN10083-3 50CrMo4 1.7228 quenching and tempering steel plates, which are produced in strict line with EN10083-3 technical standard. That 50CrMo4 steel plates should conduct below chemical composition and mechnical properties stipulation:
First, EN10083-3 50CrMo4 1.7228 quenching and tempering steel plates chemical composition standard:
|
The Element Max (%)
|
||||
|
C |
Si |
Mn |
P |
S |
|
0.46-0.54 |
0.40 |
0.50-0.80 |
0.025 |
0.035 |
|
Cr |
Mo |
Ni |
V |
B |
|
0.90-1.20 |
0.15-0.30 |
|
|
|
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
Second, EN10083-3 50CrMo4 1.7228 quenching and tempering steel plates mechanical property standard:
|
Thickness
|
Yield |
Tensile |
Elongation |
|
mm |
Min Mpa |
Mpa |
Min % |
|
3<t≦8 |
900 |
1100-1300 |
9 |
|
8<t≦20 |
780 |
1000-1200 |
10 |
|
20<t≦60 |
700 |
900-1100 |
12 |
|
60<t≦100 |
650 |
850-1000 |
13 |
|
100<t≦160 |
550 |
800-950 |
13 |
The old clients of BBN steel know well that all our factory supply EN10083-3 50CrMo4 1.7228 quenching and tempering steel plates can meet above chemical composition and mechnical properties standard. If it is the first time for you to book 50CrMo4 steel plates from BBN steel, it is a good choice to choose third party such as SGS, BV to inspect the plates before delivery. BBN steel will assist the third party to arrange inspection and send the original inspection reports to you.
