SAE J 403 AISI 1042/1045 medium carbon structural steel plate is medium carbon structural steels, J 403 AISI 1042/1045 steel under SAE J 403-AISI standard, the material number of SAE J 403 AISI 1042/1045 medium carbon structural steel plate is 1.0503,BBN Steel can regard SAE J 403 AISI 1042/1045 medium carbon structural steel plate as carbon steel. SAE J 403 AISI 1042/1045 medium carbon structural steel plate has a certain plasticity and toughness, high strength, good workability. The comparison steel grades of 1042 / 1045 steel is JIS G 4051 S45C,DIN17200 C45,BS970 070M46,
EN10083 C45 and UNI 7846 C45 steel.
SAE J 403 AISI 1042/1045 medium carbon structural steel plate belongs carbon steel which is a steel with carbon content up to 2.1% by weight. American Iron and Steel Institute (AISI) definition of Carbon Steel .Steel is considered to be carbon steel included SAE J 403 AISI 1042/1045 medium carbon structural steel plate minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; the specified minimum for copper does not exceed 0.40 percent; or the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60.
As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels, the higher carbon content lowers the melting point. You should get it when you want to have SAE J 403 AISI 1042/1045 medium carbon structural steel plate
Mild steel (steel containing a small percentage of carbon, strong and tough but not readily tempered),included SAE J 403 AISI 1042/1045 medium carbon structural steel plate own as plain-carbon steel and low-carbon steel, is now the most common form of steel because its price is relatively low while it provides material properties that are acceptable for many applications. Mild steel contains approximately 0.05–0.25% carbon making it malleable and ductile. Mild steel has a relatively low tensile strength, but it is cheap and easy to form; surface hardness can be increased through carburizing.
SAE J 403 AISI 1042/1045 medium carbon structural steel plate is often used when large quantities of steel are needed, for example as structural steel. The density of mild steel is approximately 7.85 g/cm3 (7850 kg/m3 or 0.284 lb/in3) and the Young's modulus is 200 GPa (29,000,000 psi).
BBN steel have been in export of SAE J 403 AISI 1042/1045 medium carbon structural steel plate for many years and could meet your request maximum. Additional technology and processing are available if you need .
Please contact us if you want to know information about SAE J 403 AISI 1042/1045 medium carbon structural steel plate.
