What are the factors that affect the abrasion of HARDOX500 wear-resistant steel plates?

HARDOX500 wear-resistant steel plate is a kind of relatively wear-resistant material. There are many classification methods for the abrasion of HARDOX500 steel. If they are divided according to the wear mechanism, they can be classified as abrasive wear, adhesive wear, corrosion wear, erosion wear, contact fatigue wear, impact wear, fretting wear and so on. In the industrial field, abrasive wear and adhesion wear occupy the largest proportion of the wear and tear failure of the workpiece. In the working condition, the wear forms often appear at the same time or successively, and the interaction of wear failure presents a complex form. Determining the type of workpiece wear failure is the basis for reasonable selection or development of wear resistant steel.

In addition, the wear of components is a system engineering problem. There are many factors affecting wear and tear. It includes working conditions, lubrication conditions, environmental factors, material factors, surface quality and physical and chemical properties of parts. The change of each factor may change the wear volume and even change the wear mechanism. Therefore, the material factors are only one of the factors that affect the wear of the workpiece. To improve the wear resistance of HARDOX500 wear-resistant steel plate, it is necessary to get the desired effect from the whole system of friction and wear system under the specific conditions.

After the continuous development in the later period, the main uses of HARDOX500 wear-resistant steel plates are: crusher, sieve steel plate, feeder, feeding funnel, hoist, edge steel plate, conveyor, dug, knife steel plate, gear, sprocket, etc.