Supply EN10025-3 S355NL steel plate

EN10025-3 S355NL steel plate is the normalized steel EN10025-3,as his standard (fine grained steel). EN10025-3 S355NL steel plate yield strength and tensile strength equal to Q345 low alloy steel in our country, corresponding NL is the requirement of 50 degrees below zero do the shock absorption function test and low temperature environment impact value not less than 27J. S355 is low alloy strength plate for European standard.

EN10025-3 S355NL steel plate chemical composition:

The steel plate number shall be composed of the following parts:
- the standard number (en10025-2);
- steel name or steel number: the steel name consists of the following parts:
- symbol S (structural steel) or E (engineering steel);
- the minimum yield strength of the MPa with a thickness of less than 16mm is described as the minimum yield strength.
- when feasible, the quality composition name of the impact work is marked;
When practicable, mark the letters for special purpose;

The quality level is divided into S355JR, S355J0, S355J2, S355K2, S355NL. Please contact with BBN steel if you have need for additional technology and processing for EN10025-3 S355NL steel plate. Look forward to your enquiry about EN10025-3 S355NL steel plate.